To report chi-square test results in APA 7 format, state the test, the degrees of freedom and sample size in parentheses, the chi-square value, the exact p value, and an effect size, like this: χ²(1, N = 120) = 5.00, p = .025, V = .20. Most students get the test right but lose marks on the write-up. Common errors include a missing N, a leading zero on p, or no effect size at all. This guide shows you exactly what to write and why.
Key Takeaways
- The APA 7 template for a chi-square test is χ²(df, N = sample size) = value, p = value, followed by an effect size such as Cramér's V or phi (φ).
- APA 7 reports exact p values to two or three decimals without a leading zero (p = .025). Values below .001 are written as p < .001.
- Chi-square tells you whether two categorical variables are related. Cramér's V tells you how strongly they are related.
- Always report the percentages or counts behind the test so readers can see the direction of the effect.
- The chi-square test assumes expected cell counts of at least 5 in most cells. For small 2 × 2 tables, use Fisher's exact test instead.
What is a chi-square test, and when would you use it?
A chi-square (χ²) test checks whether the counts you observed in categories differ from the counts you would expect by chance. You use it when your data are categories rather than measurements, such as pass/fail, treatment/control, or yes/no/unsure.
There are two versions, and they are reported slightly differently:
| Feature | Goodness-of-fit test | Test of independence |
|---|---|---|
| Number of variables | One categorical variable | Two categorical variables |
| Question answered | Do observed proportions match expected ones? | Are the two variables related? |
| Example | Are blood types evenly distributed? | Is treatment group related to recovery? |
| Degrees of freedom | categories − 1 | (rows − 1) × (columns − 1) |
| Typical effect size | Cohen's w | Cramér's V or phi (φ) |
If your outcome is a continuous score rather than a category, you need a different test. See our guide on how to choose the right statistical test.
What is the APA 7 format for chi-square results?
The APA 7 format for a chi-square test of independence follows this template:
χ²(df, N = total sample) = chi-square value, p = exact value, V = effect size
Each element follows a formatting rule:
- Italicise χ, N, p, and V. The superscript ² is not italicised.
- Degrees of freedom and sample size go in parentheses, separated by a comma.
- Round the chi-square value and the effect size to two decimals.
- Drop the leading zero on p and V, because neither can exceed 1. Write p = .025, not p = 0.025.
- Report exact p values unless p < .001.
How do you report a chi-square test? A worked example
Suppose 120 students were randomly assigned to either a new study-skills workshop or a control group. You then recorded whether each student passed the final exam.
| Group | Passed | Failed | Total |
|---|---|---|---|
| Workshop | 42 (70%) | 18 (30%) | 60 |
| Control | 30 (50%) | 30 (50%) | 60 |
| Total | 72 | 48 | 120 |
Step 1: Calculate expected counts. If group and outcome were unrelated, each group would mirror the overall pass rate of 72/120. That gives 36 expected passes and 24 expected fails per group. All expected counts are well above 5, so the assumption is met.
Step 2: Calculate chi-square. Sum (observed − expected)² ÷ expected across all four cells:
(42 − 36)²/36 + (18 − 24)²/24 + (30 − 36)²/36 + (30 − 24)²/24 = 1.00 + 1.50 + 1.00 + 1.50 = 5.00.
Step 3: Find df and p. With a 2 × 2 table, df = (2 − 1) × (2 − 1) = 1. A χ² of 5.00 with 1 degree of freedom gives p = .025.
Step 4: Compute the effect size. Cramér's V = √(χ² ÷ [N × (k − 1)]), where k is the smaller number of rows or columns. That gives √(5.00 ÷ 120) = .20. By Cohen's benchmarks for df = 1, this is a small-to-medium effect (.10 is small, .30 is medium, .50 is large).
Step 5: Write it up.
A chi-square test of independence examined the relationship between group and exam outcome. The relationship was significant, χ²(1, N = 120) = 5.00, p = .025, V = .20. Students in the workshop group were more likely to pass (70%) than students in the control group (50%).
This paragraph names the test, gives the statistics, and states the direction of the effect in plain language. Examiners look for all three.
One caveat: SPSS also prints a "Continuity Correction" (Yates) row for 2 × 2 tables, which gives a more conservative value. Report whichever row you planned to use, and name it in your text.
What counts as a significant chi-square result?
A chi-square result is conventionally significant when p < .05, meaning a pattern this strong would be unlikely if the variables were truly unrelated. Significance alone does not tell you the relationship matters. With very large samples, trivial differences become significant. That is why APA 7 expects an effect size alongside every test.
How do you report a chi-square goodness-of-fit test?
The format is the same, but you describe the comparison against expected proportions:
A chi-square goodness-of-fit test indicated that preferred learning format was not evenly distributed, χ²(2, N = 90) = 8.40, p = .015.
For goodness-of-fit, Cohen's w is the usual effect size. It is calculated as √(χ² ÷ N), which here gives w = .31.
What are the most common mistakes in APA chi-square reporting?
These are the errors that reviewers and thesis committees flag most often:
- Omitting N. APA 7 places the sample size inside the parentheses for chi-square specifically.
- Writing "p = .000". Software rounds tiny values to zero. Report these as p < .001.
- No effect size. Add Cramér's V or phi to every chi-square test.
- No direction. "The result was significant" does not tell readers which group did better. Add the percentages.
- Ignoring small expected counts. If more than 20% of cells have expected counts below 5, chi-square is unreliable.
Which software should you use to run a chi-square test?
Every major package runs chi-square tests, but they differ in how much of the APA write-up they produce for you.
- SPSS produces the test but not the APA sentence. A subscription costs roughly $100 per user per month.
- R and Stata require code to produce the output.
- JASP and jamovi are free desktop applications with APA-style tables, but you still assemble the sentence yourself.
StatRyx is an AI-powered statistical analysis tool that replaces manual SPSS workflows with automated, APA 7-formatted reporting. You upload your data and describe your question. StatRyx checks the expected-count assumption, switches to Fisher's exact test when needed, and returns the full sentence with χ², df, N, p, and Cramér's V already formatted.
For students writing a thesis, using StatRyx removes the copy-paste stage where most reporting errors happen.
Stop calculating this by hand — run it free in StatRyx → Try StatRyx
Frequently Asked Questions
Do you italicise chi in APA 7?
Yes. APA 7 italicises the Greek letter χ but not the superscript ², giving χ². The symbols N, p, df, and V are also italicised.
Should I report Cramér's V or phi for a chi-square test?
For a 2 × 2 table, phi and Cramér's V produce the same absolute value, so either is acceptable. For tables larger than 2 × 2, report Cramér's V, because phi can exceed 1 in those cases.
When should I use Fisher's exact test instead of chi-square?
Use Fisher's exact test when you have a 2 × 2 table with any expected cell count below 5. This situation is common with samples under about 40. Fisher's test computes an exact p value rather than relying on an approximation.
How do I report a non-significant chi-square result?
Use the same format and describe the result as non-significant. For example: "There was no significant relationship between gender and preference, χ²(1, N = 80) = 1.25, p = .264, V = .13." Still report the effect size, because it helps readers judge whether your study had enough power.